Enhance your hazardous materials training with the Training Set "Placard S" from BOXLAB Services. This comprehensive set provides you with one placard for each important class to ensure you are prepared for any situation. Each placard is delivered in the standard 250x250mm format and meets the highest quality standards according to ADR requirements.Our training set includes placards for: Explosive (Class 1.1)Flammable Gas (Class 2.1)Non-Flammable / Non-Toxic Gas (Class 2.2)Toxic Gas (Class 2.3)Flammable Liquid (Class 3)Flammable Solid (Class 4.1)Spontaneously Combustible (Class 4.2)Dangerous When Wet (Class 4.3)Oxidizer (Class 5.1)Organic Peroxide (Class 5.2)Toxic (Class 6.1)Infectious Substance (Class 6.2)Radioactive (Class 7)Corrosive (Class 8)Miscellaneous (Class 9)EHSM - Environmentally hazardous substancesHeated SubstancesLimited Quantity (LQ)Each placard is specially designed to ensure clear and precise labeling.The placards are made from a high-quality material that is extremely weather-resistant, oil- and dirt-repellent, and adapts well to curved surfaces. Each placard is equipped with a strong adhesive that maintains its adhesion even at extreme temperatures from -30°C to 140°C.In addition to the placards, we offer recommended accessories such as the BOXLAB Bio Cleaner and the squeegee to ensure optimal adhesion during application.Enhance the safety and effectiveness of your hazardous materials training with the Placards Training Set from BOXLAB Services. Order today and rely on quality and reliability for your hazardous materials transportation.

Dangerous goods label "Placard" according to ADR, RID, IATA, IMDG CodeYou are always on the safe side with placards from BOXLAB Services. All our placards are available in the standard 250x250mm format and are of a quality that exceeds ADR requirements. BOXLAB From Label for hazardous goods labeling outdoors have a seawater resistance according to; BS 5609 Section III and are fully customizable.MaterialAll of our dangerous goods labels are made of a special material that is extremely weatherproof, oil- and dirt-repellent. This material is extremely flexible and adapts well to curved surfaces while remaining very temperature resistant. The placards themselves are neutrally designed and have the standard format of 250x250mm.The special feature of our placards is the separate pull tab, which is positioned at the top edge of the placard. This pull tab is made from the same high-quality material as the Placard itself and offers numerous handling advantages. The pull tab is separated from the actual placard by a slot so that it remains on the backing paper while the placard maintains its full size. This allows the placard to be easily and safely removed from the carrier film, while maintaining the adhesive strength of the adhesive and minimizing the risk of damage.The pull tab features the BOXLAB logo branded, which is not only a symbol of quality, but also underlines the uniqueness and exclusivity of our products.Application: It is recommended to use appropriate Pre-cleaning (BOXLAB Bio Cleaner, Art. 610002) and a squeegee ( BOXLAB Squeegee, Art. 610001) to apply the placards in order to create the optimum adhesive force. An injury-proof scraper is recommended for the removal of old hazardous material and dangerous goods labels (BOXLAB safety scraper, Art. 610003). Class 1 hazard: Explosive substances and explosive objects

Dangerous goods label "Placard" according to ADR, RID, IATA, IMDG CodeYou are always on the safe side with placards from BOXLAB Services. All our placards are available in the standard 250x250mm format and are of a quality that exceeds ADR requirements. BOXLAB From Label for hazardous goods labeling outdoors have a seawater resistance according to; BS 5609 Section III and are fully customizable.MaterialAll of our dangerous goods labels are made of a special material that is extremely weatherproof, oil- and dirt-repellent. This material is extremely flexible and adapts well to curved surfaces while remaining very temperature resistant. The placards themselves are neutrally designed and have the standard format of 250x250mm.The special feature of our placards is the separate pull tab, which is positioned at the top edge of the placard. This pull tab is made from the same high-quality material as the Placard itself and offers numerous handling advantages. The pull tab is separated from the actual placard by a slot so that it remains on the backing paper while the placard maintains its full size. This allows the placard to be easily and safely removed from the carrier film, while maintaining the adhesive strength of the adhesive and minimizing the risk of damage.The pull tab features the BOXLAB logo branded, which is not only a symbol of quality, but also underlines the uniqueness and exclusivity of our products.Application: It is recommended to use appropriate Pre-cleaning (BOXLAB Bio Cleaner, Art. 610002) and a squeegee ( BOXLAB Squeegee, Art. 610001) to apply the placards in order to create the optimum adhesive force. An injury-proof scraper is recommended for the removal of old hazardous material and dangerous goods labels (BOXLAB safety scraper, Art. 610003). Class 2.1 hazard: Flammable gases

Dangerous goods label "Placard" according to ADR, RID, IATA, IMDG CodeYou are always on the safe side with placards from BOXLAB Services. All our placards are available in the standard 250x250mm format and are of a quality that exceeds ADR requirements. BOXLAB From Label for hazardous goods labeling outdoors have a seawater resistance according to; BS 5609 Section III and are fully customizable.MaterialAll of our dangerous goods labels are made of a special material that is extremely weatherproof, oil- and dirt-repellent. This material is extremely flexible and adapts well to curved surfaces while remaining very temperature resistant. The placards themselves are neutrally designed and have the standard format of 250x250mm.The special feature of our placards is the separate pull tab, which is positioned at the top edge of the placard. This pull tab is made from the same high-quality material as the Placard itself and offers numerous handling advantages. The pull tab is separated from the actual placard by a slot so that it remains on the backing paper while the placard maintains its full size. This allows the placard to be easily and safely removed from the carrier film, while maintaining the adhesive strength of the adhesive and minimizing the risk of damage.The pull tab features the BOXLAB logo branded, which is not only a symbol of quality, but also underlines the uniqueness and exclusivity of our products.Application: It is recommended to use appropriate Pre-cleaning (BOXLAB Bio Cleaner, Art. 610002) and a squeegee ( BOXLAB Squeegee, Art. 610001) to apply the placards in order to create the optimum adhesive force. An injury-proof scraper is recommended for the removal of old hazardous material and dangerous goods labels (BOXLAB safety scraper, Art. 610003). Class 2.2 hazard: Non-flammable, non-toxic gases

Dangerous goods label "Placard" according to ADR, RID, IATA, IMDG CodeYou are always on the safe side with placards from BOXLAB Services. All our placards are available in the standard 250x250mm format and are of a quality that exceeds ADR requirements. BOXLAB From Label for hazardous goods labeling outdoors have a seawater resistance according to; BS 5609 Section III and are fully customizable.MaterialAll of our dangerous goods labels are made of a special material that is extremely weatherproof, oil- and dirt-repellent. This material is extremely flexible and adapts well to curved surfaces while remaining very temperature resistant. The placards themselves are neutrally designed and have the standard format of 250x250mm.The special feature of our placards is the separate pull tab, which is positioned at the top edge of the placard. This pull tab is made from the same high-quality material as the Placard itself and offers numerous handling advantages. The pull tab is separated from the actual placard by a slot so that it remains on the backing paper while the placard maintains its full size. This allows the placard to be easily and safely removed from the carrier film, while maintaining the adhesive strength of the adhesive and minimizing the risk of damage.The pull tab features the BOXLAB logo branded, which is not only a symbol of quality, but also underlines the uniqueness and exclusivity of our products.Application: It is recommended to use appropriate Pre-cleaning (BOXLAB Bio Cleaner, Art. 610002) and a squeegee ( BOXLAB Squeegee, Art. 610001) to apply the placards in order to create the optimum adhesive force. An injury-proof scraper is recommended for the removal of old hazardous material and dangerous goods labels (BOXLAB safety scraper, Art. 610003).Class 2.3 hazard: Toxic gases

Dangerous goods label "Placard" according to ADR, RID, IATA, IMDG CodeYou are always on the safe side with placards from BOXLAB Services. All our placards are available in the standard 250x250mm format and are of a quality that exceeds ADR requirements. BOXLAB From Label for hazardous goods labeling outdoors have a seawater resistance according to; BS 5609 Section III and are fully customizable.MaterialAll of our dangerous goods labels are made of a special material that is extremely weatherproof, oil- and dirt-repellent. This material is extremely flexible and adapts well to curved surfaces while remaining very temperature resistant. The placards themselves are neutrally designed and have the standard format of 250x250mm.The special feature of our placards is the separate pull tab, which is positioned at the top edge of the placard. This pull tab is made from the same high-quality material as the Placard itself and offers numerous handling advantages. The pull tab is separated from the actual placard by a slot so that it remains on the backing paper while the placard maintains its full size. This allows the placard to be easily and safely removed from the carrier film, while maintaining the adhesive strength of the adhesive and minimizing the risk of damage.The pull tab features the BOXLAB logo branded, which is not only a symbol of quality, but also underlines the uniqueness and exclusivity of our products.Application: It is recommended to use appropriate Pre-cleaning (BOXLAB Bio Cleaner, Art. 610002) and a squeegee ( BOXLAB Squeegee, Art. 610001) to apply the placards in order to create the optimum adhesive force. An injury-proof scraper is recommended for the removal of old hazardous material and dangerous goods labels (BOXLAB safety scraper, Art. 610003).Class 3 hazard: Flammable liquids

Dangerous goods label "Placard" according to ADR, RID, IATA, IMDG CodeYou are always on the safe side with placards from BOXLAB Services. All our placards are available in the standard 250x250mm format and are of a quality that exceeds ADR requirements. BOXLAB From Label for hazardous goods labeling outdoors have a seawater resistance according to; BS 5609 Section III and are fully customizable.MaterialAll of our dangerous goods labels are made of a special material that is extremely weatherproof, oil- and dirt-repellent. This material is extremely flexible and adapts well to curved surfaces while remaining very temperature resistant. The placards themselves are neutrally designed and have the standard format of 250x250mm.The special feature of our placards is the separate pull tab, which is positioned at the top edge of the placard. This pull tab is made from the same high-quality material as the Placard itself and offers numerous handling advantages. The pull tab is separated from the actual placard by a slot so that it remains on the backing paper while the placard maintains its full size. This allows the placard to be easily and safely removed from the carrier film, while maintaining the adhesive strength of the adhesive and minimizing the risk of damage.The pull tab features the BOXLAB logo branded, which is not only a symbol of quality, but also underlines the uniqueness and exclusivity of our products.Application: It is recommended to use appropriate Pre-cleaning (BOXLAB Bio Cleaner, Art. 610002) and a squeegee ( BOXLAB Squeegee, Art. 610001) to apply the placards in order to create the optimum adhesive force. An injury-proof scraper is recommended for the removal of old hazardous material and dangerous goods labels (BOXLAB safety scraper, Art. 610003). Hazard of Class 4.1: Flammable solids, self-reactive substances, polymerizing substances and solid desensitized explosives

Dangerous goods label "Placard" according to ADR, RID, IATA, IMDG CodeYou are always on the safe side with placards from BOXLAB Services. All our placards are available in the standard 250x250mm format and are of a quality that exceeds ADR requirements. BOXLAB From Label for hazardous goods labeling outdoors have a seawater resistance according to; BS 5609 Section III and are fully customizable.MaterialAll of our dangerous goods labels are made of a special material that is extremely weatherproof, oil- and dirt-repellent. This material is extremely flexible and adapts well to curved surfaces while remaining very temperature resistant. The placards themselves are neutrally designed and have the standard format of 250x250mm.The special feature of our placards is the separate pull tab, which is positioned at the top edge of the placard. This pull tab is made from the same high-quality material as the Placard itself and offers numerous handling advantages. The pull tab is separated from the actual placard by a slot so that it remains on the backing paper while the placard maintains its full size. This allows the placard to be easily and safely removed from the carrier film, while maintaining the adhesive strength of the adhesive and minimizing the risk of damage.The pull tab features the BOXLAB logo branded, which is not only a symbol of quality, but also underlines the uniqueness and exclusivity of our products.Application: It is recommended to use appropriate Pre-cleaning (BOXLAB Bio Cleaner, Art. 610002) and a squeegee ( BOXLAB Squeegee, Art. 610001) to apply the placards in order to create the optimum adhesive force. An injury-proof scraper is recommended for the removal of old hazardous material and dangerous goods labels (BOXLAB safety scraper, Art. 610003). Class 4.2 hazard: Spontaneously combustible substances

Dangerous goods label "Placard" according to ADR, RID, IATA, IMDG CodeYou are always on the safe side with placards from BOXLAB Services. All our placards are available in the standard 250x250mm format and are of a quality that exceeds ADR requirements. BOXLAB From Label for hazardous goods labeling outdoors have a seawater resistance according to; BS 5609 Section III and are fully customizable.MaterialAll of our dangerous goods labels are made of a special material that is extremely weatherproof, oil- and dirt-repellent. This material is extremely flexible and adapts well to curved surfaces while remaining very temperature resistant. The placards themselves are neutrally designed and have the standard format of 250x250mm.The special feature of our placards is the separate pull tab, which is positioned at the top edge of the placard. This pull tab is made from the same high-quality material as the Placard itself and offers numerous handling advantages. The pull tab is separated from the actual placard by a slot so that it remains on the backing paper while the placard maintains its full size. This allows the placard to be easily and safely removed from the carrier film, while maintaining the adhesive strength of the adhesive and minimizing the risk of damage.The pull tab features the BOXLAB logo branded, which is not only a symbol of quality, but also underlines the uniqueness and exclusivity of our products.Application: It is recommended to use appropriate Pre-cleaning (BOXLAB Bio Cleaner, Art. 610002) and a squeegee ( BOXLAB Squeegee, Art. 610001) to apply the placards in order to create the optimum adhesive force. An injury-proof scraper is recommended for the removal of old hazardous material and dangerous goods labels (BOXLAB safety scraper, Art. 610003). Hazard class 4.3: Substances which, in contact with water, emit flammable gases

Dangerous goods label "Placard" according to ADR, RID, IATA, IMDG CodeYou are always on the safe side with placards from BOXLAB Services. All our placards are available in the standard 250x250mm format and are of a quality that exceeds ADR requirements. BOXLAB From Label for hazardous goods labeling outdoors have a seawater resistance according to; BS 5609 Section III and are fully customizable.MaterialAll of our dangerous goods labels are made of a special material that is extremely weatherproof, oil- and dirt-repellent. This material is extremely flexible and adapts well to curved surfaces while remaining very temperature resistant. The placards themselves are neutrally designed and have the standard format of 250x250mm.The special feature of our placards is the separate pull tab, which is positioned at the top edge of the placard. This pull tab is made from the same high-quality material as the Placard itself and offers numerous handling advantages. The pull tab is separated from the actual placard by a slot so that it remains on the backing paper while the placard maintains its full size. This allows the placard to be easily and safely removed from the carrier film, while maintaining the adhesive strength of the adhesive and minimizing the risk of damage.The pull tab features the BOXLAB logo branded, which is not only a symbol of quality, but also underlines the uniqueness and exclusivity of our products.Application: It is recommended to use appropriate Pre-cleaning (BOXLAB Bio Cleaner, Art. 610002) and a squeegee ( BOXLAB Squeegee, Art. 610001) to apply the placards in order to create the optimum adhesive force. An injury-proof scraper is recommended for the removal of old hazardous material and dangerous goods labels (BOXLAB safety scraper, Art. 610003). Danger of class 5.1: Oxidizing substances

Dangerous goods label "Placard" according to ADR, RID, IATA, IMDG CodeYou are always on the safe side with placards from BOXLAB Services. All our placards are available in the standard 250x250mm format and are of a quality that exceeds ADR requirements. BOXLAB From Label for hazardous goods labeling outdoors have a seawater resistance according to; BS 5609 Section III and are fully customizable.MaterialAll of our dangerous goods labels are made of a special material that is extremely weatherproof, oil- and dirt-repellent. This material is extremely flexible and adapts well to curved surfaces while remaining very temperature resistant. The placards themselves are neutrally designed and have the standard format of 250x250mm.The special feature of our placards is the separate pull tab, which is positioned at the top edge of the placard. This pull tab is made from the same high-quality material as the Placard itself and offers numerous handling advantages. The pull tab is separated from the actual placard by a slot so that it remains on the backing paper while the placard maintains its full size. This allows the placard to be easily and safely removed from the carrier film, while maintaining the adhesive strength of the adhesive and minimizing the risk of damage.The pull tab features the BOXLAB logo branded, which is not only a symbol of quality, but also underlines the uniqueness and exclusivity of our products.Application: It is recommended to use appropriate Pre-cleaning (BOXLAB Bio Cleaner, Art. 610002) and a squeegee ( BOXLAB Squeegee, Art. 610001) to apply the placards in order to create the optimum adhesive force. An injury-proof scraper is recommended for the removal of old hazardous material and dangerous goods labels (BOXLAB safety scraper, Art. 610003).Class 5.2 hazard: Organic peroxides

Dangerous goods label "Placard" according to ADR, RID, IATA, IMDG CodeYou are always on the safe side with placards from BOXLAB Services. All our placards are available in the standard 250x250mm format and are of a quality that exceeds ADR requirements. BOXLAB From Label for hazardous goods labeling outdoors have a seawater resistance according to; BS 5609 Section III and are fully customizable.MaterialAll of our dangerous goods labels are made of a special material that is extremely weatherproof, oil- and dirt-repellent. This material is extremely flexible and adapts well to curved surfaces while remaining very temperature resistant. The placards themselves are neutrally designed and have the standard format of 250x250mm.The special feature of our placards is the separate pull tab, which is positioned at the top edge of the placard. This pull tab is made from the same high-quality material as the Placard itself and offers numerous handling advantages. The pull tab is separated from the actual placard by a slot so that it remains on the backing paper while the placard maintains its full size. This allows the placard to be easily and safely removed from the carrier film, while maintaining the adhesive strength of the adhesive and minimizing the risk of damage.The pull tab features the BOXLAB logo branded, which is not only a symbol of quality, but also underlines the uniqueness and exclusivity of our products.Application: It is recommended to use appropriate Pre-cleaning (BOXLAB Bio Cleaner, Art. 610002) and a squeegee ( BOXLAB Squeegee, Art. 610001) to apply the placards in order to create the optimum adhesive force. An injury-proof scraper is recommended for the removal of old hazardous material and dangerous goods labels (BOXLAB safety scraper, Art. 610003). Class 6.1 hazard: Toxic substances

Dangerous goods label "Placard" according to ADR, RID, IATA, IMDG CodeYou are always on the safe side with placards from BOXLAB Services. All our placards are available in the standard 250x250mm format and are of a quality that exceeds ADR requirements. BOXLAB From Label for hazardous goods labeling outdoors have a seawater resistance according to; BS 5609 Section III and are fully customizable.MaterialAll of our dangerous goods labels are made of a special material that is extremely weatherproof, oil- and dirt-repellent. This material is extremely flexible and adapts well to curved surfaces while remaining very temperature resistant. The placards themselves are neutrally designed and have the standard format of 250x250mm.The special feature of our placards is the separate pull tab, which is positioned at the top edge of the placard. This pull tab is made from the same high-quality material as the Placard itself and offers numerous handling advantages. The pull tab is separated from the actual placard by a slot so that it remains on the backing paper while the placard maintains its full size. This allows the placard to be easily and safely removed from the carrier film, while maintaining the adhesive strength of the adhesive and minimizing the risk of damage.The pull tab features the BOXLAB logo branded, which is not only a symbol of quality, but also underlines the uniqueness and exclusivity of our products.Application: It is recommended to use appropriate Pre-cleaning (BOXLAB Bio Cleaner, Art. 610002) and a squeegee ( BOXLAB Squeegee, Art. 610001) to apply the placards in order to create the optimum adhesive force. An injury-proof scraper is recommended for the removal of old hazardous material and dangerous goods labels (BOXLAB safety scraper, Art. 610003). Class 6.2 hazard: Infectious substances

Dangerous goods label "Placard" according to ADR, RID, IATA, IMDG CodeYou are always on the safe side with placards from BOXLAB Services. All our placards are available in the standard 250x250mm format and are of a quality that exceeds ADR requirements. BOXLAB From Label for hazardous goods labeling outdoors have a seawater resistance according to; BS 5609 Section III and are fully customizable.MaterialAll of our dangerous goods labels are made of a special material that is extremely weatherproof, oil- and dirt-repellent. This material is extremely flexible and adapts well to curved surfaces while remaining very temperature resistant. The placards themselves are neutrally designed and have the standard format of 250x250mm.The special feature of our placards is the separate pull tab, which is positioned at the top edge of the placard. This pull tab is made from the same high-quality material as the Placard itself and offers numerous handling advantages. The pull tab is separated from the actual placard by a slot so that it remains on the backing paper while the placard maintains its full size. This allows the placard to be easily and safely removed from the carrier film, while maintaining the adhesive strength of the adhesive and minimizing the risk of damage.The pull tab features the BOXLAB logo branded, which is not only a symbol of quality, but also underlines the uniqueness and exclusivity of our products.Application: It is recommended to use appropriate Pre-cleaning (BOXLAB Bio Cleaner, Art. 610002) and a squeegee ( BOXLAB Squeegee, Art. 610001) to apply the placards in order to create the optimum adhesive force. An injury-proof scraper is recommended for the removal of old hazardous material and dangerous goods labels (BOXLAB safety scraper, Art. 610003).

Dangerous goods label "Placard" according to ADR, RID, IATA, IMDG CodeYou are always on the safe side with placards from BOXLAB Services. All our placards are available in the standard 250x250mm format and are of a quality that exceeds ADR requirements. BOXLAB From Label for hazardous goods labeling outdoors have a seawater resistance according to; BS 5609 Section III and are fully customizable.MaterialAll of our dangerous goods labels are made of a special material that is extremely weatherproof, oil- and dirt-repellent. This material is extremely flexible and adapts well to curved surfaces while remaining very temperature resistant. The placards themselves are neutrally designed and have the standard format of 250x250mm.The special feature of our placards is the separate pull tab, which is positioned at the top edge of the placard. This pull tab is made from the same high-quality material as the Placard itself and offers numerous handling advantages. The pull tab is separated from the actual placard by a slot so that it remains on the backing paper while the placard maintains its full size. This allows the placard to be easily and safely removed from the carrier film, while maintaining the adhesive strength of the adhesive and minimizing the risk of damage.The pull tab features the BOXLAB logo branded, which is not only a symbol of quality, but also underlines the uniqueness and exclusivity of our products.Application: It is recommended to use appropriate Pre-cleaning (BOXLAB Bio Cleaner, Art. 610002) and a squeegee ( BOXLAB Squeegee, Art. 610001) to apply the placards in order to create the optimum adhesive force. An injury-proof scraper is recommended for the removal of old hazardous material and dangerous goods labels (BOXLAB safety scraper, Art. 610003). Class 8 hazard: Corrosive substances

Dangerous goods label "Placard" according to ADR, RID, IATA, IMDG CodeYou are always on the safe side with placards from BOXLAB Services. All our placards are available in the standard 250x250mm format and are of a quality that exceeds ADR requirements. BOXLAB From Label for hazardous goods labeling outdoors have a seawater resistance according to; BS 5609 Section III and are fully customizable.MaterialAll of our dangerous goods labels are made of a special material that is extremely weatherproof, oil- and dirt-repellent. This material is extremely flexible and adapts well to curved surfaces while remaining very temperature resistant. The placards themselves are neutrally designed and have the standard format of 250x250mm.The special feature of our placards is the separate pull tab, which is positioned at the top edge of the placard. This pull tab is made from the same high-quality material as the Placard itself and offers numerous handling advantages. The pull tab is separated from the actual placard by a slot so that it remains on the backing paper while the placard maintains its full size. This allows the placard to be easily and safely removed from the carrier film, while maintaining the adhesive strength of the adhesive and minimizing the risk of damage.The pull tab features the BOXLAB logo branded, which is not only a symbol of quality, but also underlines the uniqueness and exclusivity of our products.Application: It is recommended to use appropriate Pre-cleaning (BOXLAB Bio Cleaner, Art. 610002) and a squeegee ( BOXLAB Squeegee, Art. 610001) to apply the placards in order to create the optimum adhesive force. An injury-proof scraper is recommended for the removal of old hazardous material and dangerous goods labels (BOXLAB safety scraper, Art. 610003). Class 9 hazard: Miscellaneous hazardous materials and articles

Dangerous goods label "Placard" according to ADR, RID, IATA, IMDG CodeYou are always on the safe side with placards from BOXLAB Services. All our placards are available in the standard 250x250mm format and are of a quality that exceeds ADR requirements. BOXLAB From Label for hazardous goods labeling outdoors have a seawater resistance according to; BS 5609 Section III and are fully customizable.MaterialAll of our dangerous goods labels are made of a special material that is extremely weatherproof, oil- and dirt-repellent. This material is extremely flexible and adapts well to curved surfaces while remaining very temperature resistant. The placards themselves are neutrally designed and have the standard format of 250x250mm.The special feature of our placards is the separate pull tab, which is positioned at the top edge of the placard. This pull tab is made from the same high-quality material as the Placard itself and offers numerous handling advantages. The pull tab is separated from the actual placard by a slot so that it remains on the backing paper while the placard maintains its full size. This allows the placard to be easily and safely removed from the carrier film, while maintaining the adhesive strength of the adhesive and minimizing the risk of damage.The pull tab features the BOXLAB logo branded, which is not only a symbol of quality, but also underlines the uniqueness and exclusivity of our products.Application: It is recommended to use appropriate Pre-cleaning (BOXLAB Bio Cleaner, Art. 610002) and a squeegee ( BOXLAB Squeegee, Art. 610001) to apply the placards in order to create the optimum adhesive force. An injury-proof scraper is recommended for the removal of old hazardous material and dangerous goods labels (BOXLAB safety scraper, Art. 610003). Environmentally hazardous substances

Dangerous goods label "Placard" according to ADR, RID, IATA, IMDG CodeYou are always on the safe side with placards from BOXLAB Services. All our placards are available in the standard 250x250mm format and are of a quality that exceeds ADR requirements. BOXLAB From Label for hazardous goods labeling outdoors have a seawater resistance according to; BS 5609 Section III and are fully customizable.MaterialAll of our dangerous goods labels are made of a special material that is extremely weatherproof, oil- and dirt-repellent. This material is extremely flexible and adapts well to curved surfaces while remaining very temperature resistant. The placards themselves are neutrally designed and have the standard format of 250x250mm.The special feature of our placards is the separate pull tab, which is positioned at the top edge of the placard. This pull tab is made from the same high-quality material as the Placard itself and offers numerous handling advantages. The pull tab is separated from the actual placard by a slot so that it remains on the backing paper while the placard maintains its full size. This allows the placard to be easily and safely removed from the carrier film, while maintaining the adhesive strength of the adhesive and minimizing the risk of damage.The pull tab features the BOXLAB logo branded, which is not only a symbol of quality, but also underlines the uniqueness and exclusivity of our products.Application: It is recommended to use appropriate Pre-cleaning (BOXLAB Bio Cleaner, Art. 610002) and a squeegee ( BOXLAB Squeegee, Art. 610001) to apply the placards in order to create the optimum adhesive force. An injury-proof scraper is recommended for the removal of old hazardous material and dangerous goods labels (BOXLAB safety scraper, Art. 610003). Heated fabrics

Dangerous goods label "Placard" according to ADR, RID, IATA, IMDG CodeYou are always on the safe side with placards from BOXLAB Services. All our placards are available in the standard 250x250mm format and are of a quality that exceeds ADR requirements. BOXLAB From Label for hazardous goods labeling outdoors have a seawater resistance according to; BS 5609 Section III and are fully customizable.MaterialAll of our dangerous goods labels are made of a special material that is extremely weatherproof, oil- and dirt-repellent. This material is extremely flexible and adapts well to curved surfaces while remaining very temperature resistant. The placards themselves are neutrally designed and have the standard format of 250x250mm.The special feature of our placards is the separate pull tab, which is positioned at the top edge of the placard. This pull tab is made from the same high-quality material as the Placard itself and offers numerous handling advantages. The pull tab is separated from the actual placard by a slot so that it remains on the backing paper while the placard maintains its full size. This allows the placard to be easily and safely removed from the carrier film, while maintaining the adhesive strength of the adhesive and minimizing the risk of damage.The pull tab features the BOXLAB logo branded, which is not only a symbol of quality, but also underlines the uniqueness and exclusivity of our products.Application: It is recommended to use appropriate Pre-cleaning (BOXLAB Bio Cleaner, Art. 610002) and a squeegee ( BOXLAB Squeegee, Art. 610001) to apply the placards in order to create the optimum adhesive force. An injury-proof scraper is recommended for the removal of old hazardous material and dangerous goods labels (BOXLAB safety scraper, Art. 610003).